
Wednesday, 26 March 2008
Saturday 3rd of June 2006 “They Come They Go”
Heading into the building I noticed a tall man staring up at the sky, shortly I was informed that he was my new instructor, I guy who was in the process of starting a First Officer (F/O) position on Boeing 737 – 300 (733) with Jet2.com. Jet2.com were, at this time, based at
Walking out to the aircraft, G-DT, which had a new paint livery. G-GW and G-DT had the same new livery while G-LH and G-OR, still had the old blue colours. The new all white and blue schemes were supreme, and suited the fleet and also matched the colours of the business. Starting up DT and completing the power checks, we had our zone clearance and were ready to set-off. There are two sets of controlled aerodrome areas, Controlled Area (CTR) and the Control Zone (CTZ), the CTZ is the 10nm circumference around the aerodrome, if it controlled that is (Class D or above) and can also be anything from a 5nm boundary depending on the size of the runway measured from the middle. It is totally controlled and all VFR aircraft have to be issued an entry or exit clearance before flight, if they are leaving the zone that is.
I was swiftly getting the hand of the taxying controls and the foot brakes, but I wasn’t confident at controlling them at speed, on take-off for example. I become very scared when the aircraft would veer off the runway centre line and I’d get the impression that if I applied heavy pressure the aircraft would top-up. On this take-off, my first controlled take-off, I had opened throttle and began my take-off roll with the foot brakes slightly pressurised, like accelerating down a motorway in a car with the brakes on. We lifted off after rotation (Vr) and the instructor took control, “I have control”, swiftly I handed over the control and replied “You have control”, an old military procedure which should always be used when flying in all types of aircraft.
Flying straight and level was quite simple, we’d use the reference Attitude, was to set the aircraft’s nose on the horizon, Power, to set the power back to 1,200 RPM and Trim. That was the levelling out reference, ATP.
The technique in a level out ATP, is to hold the attitude and reset the power, then let the climb/decent reset and to trim the aircraft to the attitude, it should hold relatively accurately if trimmed correctly and the pressure on the control column will relax.
Update on photos
I will blog photos from my FlickR account to this page randomly according to their date taken, I will post them as accurately to the aircraft they were taken from.
